Arduino Smart Home Model Simple Version – Kuongshun Electronic Shop
  • ·Tel: +86-755-23956813 ·Email: info@kuongshun.cn
Wish List

Arduino Smart Home Model Simple Version

Introduction

Control the smart home model with  Arduino and sensor modules such as DHT11, which features remote garage, smart door lock, automatic door light, elevator, multi-color lights and more.

 

 

     

    Item List

    Name

    Quantity

    Arduino UNO

    3

    DuPont line

    Several

    Power cable

    1

    RGB LED module

    1

    LCD1602 module

    1

    Solderless Breadboard

    1

    DHT11 module

    1

    stepper motor

    1

    Sg90 Servo

    2

    Paper box

    Several

    Hot melt glue

    Several

    White LED

    1

    Thread rope

    1

     

    Function Description

    1. Infrared remote control garage
      Through the infrared receiving module and the infrared remote control, use one servo motor to control the opening of the garage door.
      Install the servo on one side of the garage and make a pole attached to the servo.
      remote control garage
    2. RGB LED
      Controlled by two buttons, one button controls the LED switch, and the other controls the RGB color after the LED is turned on.
    3. Elevator
      Use a wire to connect the elevator part to the stepper motor. The steering of the motor is controlled by two buttons to control the lift of the elevator.
      Place the stepper motor behind the elevator and use a rope to link the shaft of the stepper motor to the elevator so that the elevator will rise and fall as the motor rotates.
      elevator motor
    4. RFID access card
      Use the rfid module and a servo to control the door switch and connect a led light to the arduino as a porch light. When the rfid recognizes the correct ic card, the door automatically opens and the porch light turns on. If the wrong ic card is recognized, the door does not turn on and the led light flashes.
      RFID card
    5. Temperature and humidity monitoring
      The temperature and humidity of the house environment are monitored by DHT11 sensor module, and displayed by LCD 1602 Module.
      DHT11 LCD1602

     

     Appearance Production

     

    Solidworks

     Smart home model1Smart home model2

     

    smart home

     

    Code & Library

     

     

      Leave a comment

      Your Name *

      Email address *

      Message