Feature:
The 3D Touch Auto Leveling Sensor is a device that uses the Hall effect to achieve leveling. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing. Printing can also be achieved even though the platform is not flat.
3D Touch Parameters:
| Voltage |
5V |
|
Current |
15mA |
|
Max current(peak) |
300mA |
|
Shell material |
PC |
|
Shell color |
White translucent |
|
Cable length |
short:200mm Long: 1000mm |
| Wire |
3pin: Green: -GND |